Showing posts with label quantum electrodynamics. Show all posts
Showing posts with label quantum electrodynamics. Show all posts

2025-10-02

FOLLOW-UP: Learning and Making Sense of Differential Geometry in General Relativity

This post is a follow-up to the previous post [LINK] in which I tried to make sense of the mathematics of differential geometry, especially in the context of general relativity, and proposed notation that may be less confusing, more consistent, and arguably more powerful than traditional notation given the existence of a metric in general relativity. With similar motivations, this post explores how some of the ideas of electromagnetic (EM) theory may change on curved manifolds. Follow the jump to see more.

2025-04-17

Green's Functions and Violin Making

A few years ago, a friend of mine, who is a very accomplished player of the violin & viola and who is an amateur builder of violins & violas, sent me a video on YouTube [LINK] of the violin maker Peter Westerlund showing how to create violins (and violas, by the same logic and with only slightly different overall dimensions) that consistently produce sounds that people well-versed in European classical music judge to be of high quality. Many such people have praised the consistent warm & rich aural tones of violins & violas made in Italy by Andrea Guarneri around 1650 & Antonio Stradivari around 1700, yet it has been difficult for any violin maker to replicate such warm & rich tones in the violins that they have made, in part because there is little scientific consensus about the specific acoustic spectral qualities that make those violins so highly valued. Further complicating matters, as explained in a news article by Science magazine in 2017 [LINK], is the fact that many blind & double-blind studies have left musicians & keen listeners preferring contemporary violins over those made by Stradivari or Guarneri. Even if the instruments by made by Stradivari or Guarneri aren't consistently rated the best, they are rated very highly far more consistently than those made by other violin makers (though this may reflect selection bias in such tests), so there may be merit to considering how to replicate those instruments' aural qualities.

Traditionally, violin makers have carefully studied the exact dimensions, shapes, and materials used in instruments made by Stradivari or Guarneri and done their best to replicate them. However, the resulting aural qualities have typically been judged to be unsatisfactory. This is in various parts due to the effects of aging on the material components of violins (which generally cannot be artificially accelerated), one-off differences in instances of even the same materials used, slight deviations in the craftsmanship, shapes, or dimensions, and other factors that have yet to be explained. This motivated Westerlund (who is probably not the first person to come up with this method) to develop a method to reliably create instruments with highly consistent sounds even if they don't replicate sounds from instruments made by Stradivari or Guarneri per se. The method is as follows. Each violin or viola has a top plate and a back plate, and these are initially constructed separately, joined only later on corresponding sides of the ribs. For each plate, after getting the basic shape & thickness correct, the violin maker should further adjust the shape by tapping or rubbing the plate in various locations, ideally using the same tapping or rubbing motion with the same intensity every time. The violin maker should iteratively shape (by cutting or scraping) at & around those locations of tapping or rubbing and then continue to tap or rub at all locations, until eventually, the tapping or rubbing motion produces approximately the same tone at every location. Once that has been achieved, shaping of the plate is finished.

My background in theoretical & computational nanophotonics from graduate school, even though I was already a few years removed from that even by a few years ago (having changed fields to transportation research after graduate school [LINK]) when my friend shared that video with me, made me interested in trying to mathematically & physically understand why Westerlund's process is successful in creating instruments that have strong internal tonal consistency. However, I wasn't able to come up with a satisfactory answer until much more recently. Follow the jump to see more of my thinking about this, leading to the resolution.

2024-04-01

Transitioning from microscopic to macroscopic and quantum to classical regimes

I recently read two things that were of interest to me having previously worked in physics. One was an article in The New Yorker magazine [LINK], in which the author does a good job of going over the successes of mathematical modeling in the physical sciences and contrasting this with the limitations of mathematical modeling in public health (showing, for example, how many models of the spread of contagions fail when governments & societies take fast & drastic collective actions to limit the spread), the failures of mathematical models in social sciences where the outputs of those models can create feedback loops with public sentiment (for example in political polling), and the way that many people who use machine learning models in different domains expect the fancy curve-fitting of those models to represent fundamental understanding when that might not really be so. The other was a journal article published in Physical Review Letters [LINK] about how it can be possible to test the extent to which a massive (as opposed to massless) object which exhibits the dynamics of a simple harmonic oscillator and prepared in a quantum coherent state can be tested for deviations from classical behavior using a protocol that does not depend on the mass of the object (although I question this given that the protocol depends on timed measurements that depend on the frequency of oscillation, and in many physics contexts the frequency does depend on the mass as \( \omega = \sqrt{k/m}\), but this is somewhat of a quibble). These two things got me to think about something that I realized I never got out of many years of formal undergraduate & graduate education in physics. This can be illustrated with the following example.

In introductory physics classes that focus on Newtonian mechanics, a prototypical problem involves a block, modeled as a point mass, sliding (with or without friction) down a fixed triangular incline in the constant gravitational field of the Earth. In the context of those classes, instructors will be careful to note that this is merely a model, and corrections could come from the inclusion of the variation of the Earth's gravitational field & surface curvature, the technical possibility of moving the triangular incline (which must be much more massive than the block in question), the shape of the block, variations in the touching surfaces, air resistance, et cetera. In later classes, instructors may point out corrections due to special relativity (i.e. the speed of light) and general relativity (as it relates to the Earth's gravitational field).

However, in later classes about quantum mechanics & statistical mechanics, instructors explain how different the models are from models of Newtonian mechanics at human scales, but they often promise that appropriate treatments of aggregates of microscopic constituents can consistently recover results from Newtonian mechanics, yet this promise is almost never fulfilled. In particular, wavefunctions that describe pure states of single microscopic particles are quite far removed from the simple dynamical variables describing blocks on inclined planes, although statistical mechanics can probabilistically describe the solid states of the block & inclined plane as well as the gaseous state of the surrounding air, it is not usually extended to describe the dynamics of the block sliding down the inclined plane. For example, if a block sliding down a fixed inclined plane of horizontal angle \( \theta \) in a uniform gravitational field is described as having equations of motion \( m\ddot{x} = mg\sin(\theta) \) where the \( x \)-axis is defined as pointing downward parallel to the slope of the inclined plane for increasing \( x \) and the \( y \)-axis points outward in the normal direction from the inclined plane, then I wish to see corrections of the form \( m\ddot{\vec{x}} = \sum_{\mu = 0}^{\infty} \sum_{\nu = 0}^{\infty} \hbar^{\mu} k_{\mathrm{B}}^{\nu} \vec{f}^{(\mu, \nu)} \) where the lowest-order term is \( \vec{f}^{(0, 0)} = mg\sin(\theta)\vec{e}_{x} \). I have never seen these sorts of quantum or statistical corrections to Newtonian equations of motion in simple (in the context of Newtonian mechanics) systems. Similarly, it is rare to see how quantum or statistical mechanical systems can, in appropriate limits, reproduce classical systems; I can only think of the quantum coherent state of the simple harmonic oscillator as well as how the Moyal bracket in the phase space formulation of quantum mechanics reduces to lowest order in \( \hbar \) to the Poisson bracket, and in the latter case, intuitive construction of the quantum phase space quasiprobability function is made more difficult (compared to construction of a classical phase space probability density function, as I did in a post [LINK] from a few years ago) by the fact that unlike the classical phase space probability density function, the quantum phase space quasiprobability function cannot be arbitrarily localized in phase space, it can take on negative values for certain wavefunctions, it is compressible in phase space with respect to its own evolution over time, and it is not obvious how it should look for a system of many particles constituting a macroscopic object like a block (in contrast to a classical phase space probability density function, which for such a system could just be a product of Dirac delta functions localizing each microscopic constituent to a point in phase space).

These considerations reminded me of a discussion I had last year with friends from college, who also did course 8 (physics) with me. We came to a consensus that while people who do not become physics majors should, as usual, get exposure to Newtonian physics and the basics of electricity & magnetism, people who become physics majors should have a curriculum over 3-4 years that exhibits a sensible conceptual progression. In particular, after seeing Newtonian mechanics, such students should then be exposed to Lagrangian & Hamiltonian formulations of classical mechanics. The Lagrangian formulation of classical mechanics should then be used to develop intuitions about mechanical waves, which in turn can lead to introductions to classical field theory and development of classical electromagnetic theory as a rich example of a classical field theory. (I would also personally recommend using the introduction of mechanical waves to introduce the linear algebraic treatment of waves and then reintroduce the linear algebraic treatment of waves into the treatment of linear classical field theories in general & linear classical electromagnetic theory in particular.) The Hamiltonian formulation of classical mechanics should then be used to develop intuitions about probability distributions in classical mechanics, which in turn can be used to develop intuitions about statistical mechanics. Optionally, at this point, the Hamiltonian formulation of classical mechanics can also be used to develop intuitions about nonlinear dynamics & chaos theory, but while this is good for the broader education of physics students, it is less immediately relevant for the introduction of quantum theory to come soon after (because quantum mechanics is linear). Finally, only after these things happen should quantum theory be introduced, such that there are clear connections of the wavefunction formulation of quantum mechanics to mechanical waves, the phase space formulation of quantum mechanics to classical phase space probability distributions, and the linear algebraic framework of quantum mechanics to linear algebraic treatments of classical field theories (including linear classical electromagnetic theory); this will ensure that students understand how ideas like superposition, interference, rotation through a Hilbert space, statistical uncertainty, and related ideas are not unique to quantum mechanics (which is unfortunately too often a consequence of the way quantum mechanics is typically introduced in undergraduate curricula, at least in the US). We also came to a consensus that in each course, there should be clear explanations of what prototypical systems are analytically solvable, what prototypical systems are not analytically solvable, and why (in each case).

2022-06-01

Nonlocality and Infinite LDOS in Lossy Media

While I have written many posts on this blog about various topics in physics or math unrelated to my graduate work as well as posts promoting papers from my graduate work, it is rare that I've written direct technical posts about my graduate work. It is even more unusual that I should be doing so 2 years after leaving physics as a career. However, I felt compelled to do so after meeting again with my PhD advisor (a day before the Princeton University 2020 Commencement, which was held in person after a delay of 2 years due to this pandemic), as we had a conversation about the problem of infinite local density of states (LDOS) in a lossy medium.

Essentially, the idea is the following. Working in the frequency domain, the electric field produced by a polarization density in any EM environment is \( E_{i}(\omega, \vec{x}) = \int G_{ij}(\omega, \vec{x}, \vec{x}')P_{j}(\omega, \vec{x}')~\mathrm{d}^{3} x' \) which can be written in bra-ket notation (dispensing with the explicit dependence on frequency) as \( |\vec{E}\rangle = \hat{G}|\vec{P}\rangle \). The LDOS is proportional to the power radiated by a point dipole and can be written as \( \mathrm{LDOS}(\omega, \vec{x}) \propto \sum_{i} \mathrm{Im}(G_{ii}(\omega, \vec{x}, \vec{x})) \). This power should be finite as long as the power put into the dipole to keep it oscillating forever at a given frequency \( \omega \) is finite. However, there appears to be a paradox in that if the position \( \vec{x} \) corresponds to a point embedded in a local lossy medium, the LDOS diverges there.

I wondered if an intuitive explanation could be that loss should properly imply the existence of energy leaving the system by traveling out of its boundaries, so the idea of a medium that is local everywhere (in the sense that the susceptibility operator takes the form \( \chi_{ij}(\omega, \vec{x}, \vec{x}') = \chi_{ij}(\omega, \vec{x})\delta^{3} (\vec{x} - \vec{x}') \) at all positions) and is lossy at every point in its domain may not be well-posed as energy is somehow disappearing "into" the system instead of leaving it. Then, I wondered if the problem may actually be with locality and whether a nonlocal description of the susceptibility could help. This is where my graduate work could come in. Follow the jump to see a very technical sketch of how this might work (as I won't work out all of the details myself).

2022-04-04

FOLLOW-UP: How to Tell Whether a Functional is Extremized

This post is a follow-up to an earlier post (link here) about how to tell whether a stationary point of a functional is a maximum, minimum, or saddle point. In particular, as I thought about it more, I realized that using the analogy to discrete vectors could help when formulating a more general expression for the second derivative of the nonrelativistic classical action for a single degree of freedom (i.e. the corresponding Hessian operator). Additionally, I thought of a few other examples of actions whose Hessian operators are positive-definite. Finally, I've thought more about how to express these equations for systems with multiple degrees of freedom (DOFs) as well as for fields and about how these ideas connect to the path integral formulation of quantum mechanics. Follow the jump to see more

2021-07-01

Twelfth Paper: "Near-field radiative heat transfer in many-body systems"

My twelfth paper has been published! It is in volume 93, issue 2 of Reviews of Modern Physics, and an older preprint of it is available too for those who don't have access to academic journals (it is identical in content and only differs in formatting). Unlike my previous blog posts about published papers that I have written, this one will not strictly use the thousand most common words in English. This is because unlike my previous papers, which put forth novel ideas advancing the field of nanophotonics, this is a review paper that gives a broad historical scientific overview of the subject, namely, the flow of heat through light (i.e. electromagnetic (EM) fields) between objects that are typically separated by less than 1 micron (approximately 1% of the width of a typical human hair). It goes over work that other scientists have done theoretically and experimentally in this subject, and this paper in particular is divided into two main sections.

The first section, to which my PhD advisor & I made most of our contributions, is about the flow of heat via EM fields between just 2 objects. Relevant issues include choices of materials (mainly metals/conductors versus insulators), choices of shapes for objects, advances in experimental measurement techniques, advances in computational simulation techniques, and derivations of upper limits to the flow of heat via EM fields between 2 objects (mostly referring to my previous 2 papers that were the subject of the following linked blog post).

The second section, which constitutes the bulk of the paper, is about the flow of heat via EM fields among more than 2 objects. Relevant issues include changes in temperature over time in objects that are very small compared to their separations, the fact that the heat flow among more than 2 objects involves very complicated interactions among them, the fact that material properties could depend on temperature so there could be many possible sets of object temperatures where heat flows but temperatures don't change, heat flow via EM fields over distances longer than 1 micron, applications of heat flow via EM fields to microscopy techniques, heat flow via EM fields in materials that can be attracted to permanent magnets, and applications of heat flow via EM fields to engineer new devices.

2020-08-10

Eighth, Ninth, Tenth, and Eleventh Papers

My eighth, ninth, tenth, and eleventh papers have been published! These require subscriptions to read, so here are alternate links to older preprints for the eighth, ninth, tenth, and eleventh papers, respectively (which have most of the same content, with some minor changes to explanations, citations, and figures relative to the published versions). As with my previous papers, in the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next. While these papers aren't as closely related to each other as the previous three, there are enough relations that I'm putting them together in a single post. These papers need a lot more math (note: "math" isn't one of the ten hundred words) than the papers before, and because they need a lot of thinking to get, I actually won't say as much about them.

On another note, this is a milestone for me because these are the last papers from my PhD in which I was a leading author. I still have one more review paper left to be published, but as that has been submitted to the journal and as I'm not the leading author, I don't really need to worry about that at this point. (Of course, once that is published, I will write a blog post summarizing it, though as it is a review paper, that summary will probably be quite short.) Thus, I am truly done with the work from my PhD, and can fully shift my mindset away from physics toward thinking about problems in transportation policy, as I will do in my postdoctoral research at UC Davis.

2020-05-28

Reflection: My Graduate Experiences at Princeton University

Please note: there will be mentions of the current global public health crisis in this post. I have no background in medicine, public health, or closely-related fields. Please consult public health agencies and other governmental agencies for guidance regarding responses to this crisis, and please consult actual professionals as appropriate for individual problems in this context.

This post is the third in a series of three posts about the end of my time as a PhD student in Princeton University (in this post henceforth referred to simply as "the university" when there is no ambiguity). As a write this, I have successfully defended my PhD thesis! Furthermore, I will officially be graduating this coming weekend. This post follows the first, which was meant as a reflection of the events of this public health crisis that led to my premature physical departure from the university campus combined with a paean to the friends I made over the course of 6 years in the PhD program, and the second, which explained the experiences & thought processes that led to my decision to change careers from research in physics to transportation policy. This post is a broader reflection of my time and experiences at the university, with all of its ups and downs, and a message of gratitude toward the people in the university and elsewhere who meant so much to me during my time in the program; a lot of it is taken from the acknowledgments in my thesis, though for privacy reasons, I won't be giving explicit names. Additionally, there will undoubtedly be many comparisons over the course of this post to my undergraduate experiences at MIT, for which I wrote a post around the time of graduation 6 years ago. Follow the jump to see more.

2020-01-13

Fifth, Sixth, and Seventh Papers

My fifth, sixth, and seventh papers have been published! These require subscriptions to read, so here are alternate links to older preprints for the fifth, sixth, and seventh papers, respectively (which have most of the same content, with some minor changes to explanations, citations, and figures relative to the published versions). As with my previous papers, in the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next. I'm putting these three papers together in a single post because they form a trilogy of sorts, all having to do with finding the biggest number for how much heat, through light, can go from one body to another when they are really close together, or can go from one body into outer space. These papers need a lot more math (note: "math" isn't one of the ten hundred words) than the papers before, and because they need a lot of thinking to get, I actually won't say as much about them.

The fifth paper is called "T Operator Bounds on Angle-Integrated Absorption and Thermal Radiation for Arbitrary Objects", and is in volume 123, issue 5 of Physical Review Letters. This is the one that has to do with how much heat, through light, can go from one body to outer space. People knew before that the number for how much heat really big bodies can put through light into outer space grows like the surface area of the body, but for really small bodies it grows like the space of the whole body (volume), and they were not sure how these two things join in between. This paper lets people figure out what the most heat is that can go from a body through light into outer space no matter what the largest shape the body can sit in, and shows how to join the things that people knew before for middle-size bodies of different shapes. (Another press release from my department can be found here.)

The sixth paper is called "Fundamental limits to radiative heat transfer: Theory", and is in volume 101, issue 3 of Physical Review B, while the seventh paper is called "Fundamental Limits to Radiative Heat Transfer: The Limited Role of Nanostructuring in the Near-Field", and is in volume 124, issue 1 of Physical Review Letters. Those two papers go together, so I'll write about them together. The sixth paper is about the math behind figuring out the biggest number for heat, through light, to go between two bodies. The seventh paper shows that heat, through light, going between two big flat bodies that are close together can be pretty close to the biggest number possible, so making the shapes of the bodies less simple than just flat surfaces is of no use.

2019-11-05

Fourth Paper: "Impact of nuclear vibrations on van der Waals and Casimir interactions at zero and finite temperature"

My fourth paper has been published! It is in volume 5, issue 11 of Science Advances, which is an open-access journal, so anyone can read it. As with my previous papers, in the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next.

In papers that came before this one, I looked at how to do a better job of figuring out the van der Waals (vdW) forces, which are the forces that let geckos (small animals with hard skin over which your finger can slip easily) stick to anything no matter what it is made of, between molecules, which are the little things that make up most of the stuff we see and are in turn made of smaller things called atoms; I also looked at how to do a better job of figuring out how heat (through light) goes between different molecules, especially when they are near larger bodies, and that needed me to do a better job of considering how molecules can make changes on each other through light, and that means that I need to better consider how the full atoms within molecules move toward and away from each other in a way that repeats itself. In this paper, I used the new way from the paper that came before of considering how molecules can make changes on each other through light to show what happens with vdW forces between molecules and larger bodies, especially when they aren't as cold as possible but are as hot as a room you might go into each day. It turns out that for small or long thin molecules made of carbon atoms, our work can do a pretty good job of showing how being as hot as a room can make vdW forces look very different. For some kinds of large thin sheets of atoms, like boron nitride in which every other atom is boron or nitrogen, our work still does a pretty good job because the electrons, which are the parts of the atoms that are the smallest, lightest, and move around the most, are still pretty close to the centers of the atoms. On the other hand, for other kinds of large thin sheets of atoms, like graphene in which every atom is carbon, our work has some more problems, because electrons in graphene can move around a lot more than our work might make you think, and the ways in which those electrons change how the rest of the atoms move around when they are as hot as a room (instead of as cold as possible) makes vdW forces harder to figure out than our work can say. This means we still need to do more work to better figure out how vdW forces look for those kinds of sheets.

2019-07-29

My Time in Luxembourg and at the META19 Conference in Lisbon

This is an update from my recent travel to Luxembourg and Lisbon. I had the privilege of traveling to Luxembourg to deliver an invited talk to my collaborator's group; we have published 2 papers together, are about to have a third published (for which I'll write a post once the publication is official), and are working on a fourth. It was productive to meet with my collaborators to hash out the details of our fourth paper together, and I think I did reasonably well delivering my talk, for which the first part was about the work with my collaborators modeling fluctuational electromagnetic phenomena at the interface between small objects that have to be treated at the atomic scale and large objects that can be treated as continuous, and the second part was about my more recent work purely within my group putting upper bounds on thermal radiation and heat transfer. Additionally, I appreciated the interesting conversations I had after my talk with various members of that group.

I also got to go to the META19 Conference in Lisbon, which is centered around research in nanophotonics and metamaterials; there, I presented an invited talk about the aforementioned work on upper bounds to heat transfer, which my advisor graciously let me do in his place. It was great to meet people that I knew associated with my advisor but hadn't seen in a few years, and we got to discuss each other's work in great depth; I got to also meet a few other people for the first time, and had some good conversations with them about our respective projects too. That said, while I think the delivery of my presentation there was good, I did feel like I could have done a better job of preparing my presentation in a way that better fit the context: my presentation may have been too theoretical, so for an audience of engineers who care more about using metamaterials and nanophotonic architectures to make new devices, I could have been clearer about broad physical insights and done a better job connecting the findings in my work to ideas of interest to such researchers. Additionally, I could have probably done a better job networking, though my reticence was in part due to uncertainty on my part regarding my future plans.

I also had a day in each city to explore, but there were issues in each case. For one, neither Luxembourg nor Lisbon are especially tourist-oriented cities compared to places like London, Paris, Madrid, Barcelona, or Berlin, as far as I've heard: both cities have a lot of nice restaurants and cafes as well as many nice viewpoints and other areas to simply hang out and relax, but there aren't so many specific attractions, as Luxembourg is known more for housing EU governmental offices as well as international finance companies, while Lisbon seems to generally not have invested in tourism as much. I did hear in each place that the surrounding countrysides are beautiful, so perhaps that is where more tourism happens and where more interesting things can be seen. (Also, it didn't help that I was in Lisbon on a Monday, when many things are closed.) For another, both cities are not especially good for people like me in power wheelchairs who want to travel independently; people who are able-bodied, in manual wheelchairs, or have disabilities that require them to be assisted by partners or personal care attendants full-time may be better served. In Luxembourg, I didn't feel like I missed too much because it's a fairly small city anyway, and the public transit buses were accessible (though there were some issues even there). In Lisbon, I felt like I missed more because it is a bigger city, yet its Metro rapid transit train system, which is supposedly accessible, actually has large gaps between the train floors and platforms, and most of the buildings have large steps to enter. I do hope to visit Europe again, but when I do, I hope to make sure it will be a city/area that is more friendly to people in power wheelchairs.

2019-03-21

My Time at the 2019 APS March Meeting

This is a quick update from my trip to the 2019 APS March Meeting in Boston, Massachusetts at the beginning of March. I felt like my time overall was somewhat mixed, though positive on balance. On the negative side, my talk was lumped into a totally unrelated session on a Thursday afternoon, in which the talks weren't of interest to me and were generally not so well-delivered, the audience consisted almost entirely of the speakers who left after their own talks (and that included me after I saw what was happening, though I was grateful that some of my friends came for my talk), and the first talk which was supposed to be a 36 minute-long invited talk was canceled in the absence of the speaker, leading to a break during that time. Additionally, my advisor and I were busy preparing a paper unrelated to the work I would be presenting, and I've also been taking my time to figure out what I want to do after graduation, so I didn't prepare a schedule of talks to attend as well as I had in the previous two years. That said, on the positive side, I paced myself properly in attending talks, and I did appreciate having conversations with people from my department as well as people I knew in college about our work as well as future plans. I also had a lot of fun hanging out with friends from college as well as graduate school, and though I could have done a better job networking, I did try to reach out as much as I could. Finally, I had a great time skipping the last day of the conference and visiting MIT instead, where I got to catch up with professors from the physics department as well as other people whom I knew well in college (and met some people for the first time too); I felt like that was a far more useful & productive move. Next year, I hope to be able to present in a session more relevant to my current research interests, and to do a better job of tailoring my networking and session attendance to my future interests (which I hope will have solidified by then).

2018-08-01

Third Paper: "Phonon-Polariton Mediated Thermal Radiation and Heat Transfer among Molecules and Macroscopic Bodies: Nonlocal Electromagnetic Response at Mesoscopic Scales"

My third paper has been published! It is in volume 121, issue 4 of Physical Review Letters, and an older preprint of it is available too for those who don't have access to academic journals (it has all of the same figures and ideas, though it is missing a few sentences of further explanation as well as a couple of new citations that were inserted for the final publication). As with my previous papers, in the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next.

In the paper that came before this one, I looked at how to do a better job of figuring out the van der Waals (vdW) forces, which are the forces that let geckos (small animals with hard skin over which your finger can slip easily) stick to anything no matter what it is made of, between molecules, which are the little things that make up most of the stuff we see and are in turn made of smaller things called atoms. I tried to figure out how these forces look at distances where the fact that molecules are made of atoms is important, but if those molecules are near much larger bodies, the fact that the larger bodies are made of atoms and molecules should be less important; it turns out that at those distances, how fast light goes matters a lot, and using ways to figure out these forces exactly instead of using easier ways to figure out those forces makes a big change in what those forces are. That paper was able to show how to bring together all of these different ideas from considering large and small bodies in a single way where none of those ideas can be ignored. That would be important when considering new kinds of molecules like graphene, which is made of a lot of carbon atoms in a thin sheet, or really long molecules like DNA or those found in foods, when those molecules are near larger bodies that we make.

This paper looks at the same sorts of molecules, but not at vdW forces anymore. Instead, in this paper, I look at how heat (through light) goes between different molecules, especially when they are near larger bodies. For that, I need to do a better job of considering how molecules can make changes on each other through light, and that means that I need to better consider how the full atoms within molecules move toward and away from each other in a way that repeats itself. By doing that, I can now show how heat through light goes between different molecules, whether they are close together or far away from each other. When people considered heat going through light between larger bodies, they found that the heat would keep growing as the bodies came closer together, and that growing wouldn't stop; from knowing how things work every day, we know that once bodies come close enough, they touch each other, and the growing stops at some point. In this paper, I've shown that when molecules come close together, the heat grows for a while, but if they come close enough, that growing does stop, so I've been able to show what distance we can say two molecules touch each other, so that heat going between molecules happens through them touching instead of through light. This is really important for things like graphene, which are used as part of things used for making power from the sun by getting its light and heat, and also for making new things that can become part of computers made of really small things like molecules that work because of heat going between different parts.

2018-03-19

My Time at the 2018 APS March Meeting

This is a quick update from my trip to the 2018 APS March Meeting in Los Angeles, California at the beginning of March. I felt like I learned many lessons from my trip to the 2017 APS March Meeting and was able to apply them here. Chief among them, I realized that a large part of this conference is networking, whether that involves the formation of new relationships or the maintenance of old ones, so I got to enjoy myself more in meeting with old friends and collaborators and making some new connections as well; that also meant that I focused more on going to talks of immediate relevance to my research interests as well as my friends' talks to show them support, and I didn't worry about trying to fill each day by attending talks and sessions like I did last year. I was able to present my work this time too: I presented a model for vibrational contributions to radiative heat transfer and van der Waals interactions among molecules, along with interesting results in specific systems. This was in a session that included people from both the microscopic van der Waals and macroscopic Casimir communities, and while I was the only one who discussed heat transfer per se, I did get to see a nice mixture of the two communities, and some interesting discussions did come out of that. Overall, I had a great time, but I do think that as I progress further in my graduate research career, it may be good to not only continue to attend the APS March Meeting in the future but look into more specialized conferences too.

2018-02-26

Halfway through Fourth Year

I realized that I hadn't written anything broadly about my progress through the PhD program in a while, so I should do that now. I'm halfway through the fourth year of the program, and this year has allowed me to take on more responsibilities compared to last academic year.

For one, I'm now doing more projects than I was last year. In particular, last year, my main focus was on fleshing out a way to combine atomistic and continuum treatments of electrodynamic response in order to understand van der Waals interactions among molecules and larger bodies (which was the subject of my second paper). I did a bit of work on the side extending this to situations where the molecules may deform, and while that work still hasn't been published yet, it was not particularly difficult to understand what was going on there given the broader picture of mesoscopic van der Waals interactions. In any case, I was able to basically focus on one major project whose path and end goal seemed fairly well-defined, and as a result, I was able to take things a bit easier. By contrast, right now I'm working on two parallel projects incorporating vibrational effects into this description of molecular response and seeing how that affects the van der Waals interactions as well as heat transfer between molecules. This required quite a bit more formulation and writing & testing code on my part, and featured significantly more uncertainty in the results, because while the basic formulation of van der Waals interactions between molecules and macroscopic bodies for my previous project could be relatively easily extrapolated from our collaborators' description of interactions among molecules alone (and the resulting physical interactions were relatively more predictable), I wasn't really sure what to expect with respect to the modification of these interactions due to vibrations, nor what to expect for heat transfer or thermal emission at all; this is because as far as I can tell, other people haven't really considered molecular vibrations in such a context in an ab-initio manner thus far. Thus, I've felt like in terms of research, I have a lot more work and more uncertainty on my plate now than I did a year ago.

For another, I was a TA for the first time last semester and am a TA again this semester. This semester is turning out to be particularly interesting in that regard, because while last semester I was a TA for a graduate-level quantum mechanics class where I could basically count on students knowing what they were doing and not needing me to hold their hands at every obstacle, this semester I am a TA for a freshman-level linear algebra class that is being taught as an engineering class for the first time; not only am I assisting with a class for which the curriculum is being developed afresh, but this class has a diverse group of freshman who are from less-resourced schools and may have less formal math and science background than some of their peers here, so beyond ensuring that I be an effective pedagog for freshmen, I now have to make sure that I can connect with these students by making myself feel inclusive rather than forbidding.

Most broadly, I now have to think more seriously about what I want to do after I graduate, as that point comes nearer. The big question is whether I want to stay in academia or not, given both the locations where I may find interesting opportunities and the nature of such opportunities. For a while, I thought that I would more likely want to leave academia given the tough odds of finding a tenured faculty position in a place that I would like to be, so I at least thought of doing an internship this coming summer outside of academia. While I still haven't ruled out the latter idea, I have come to realize that I enjoy academic research enough to consider continuing it for at least a few years after graduation, and I've also realized that it isn't necessarily a good choice to try to divine my career many years in the future based on my assessment of my current research progress, as that future becomes less certain the farther away it is. Given that, I also feel like a summer internship could disrupt the pace of my current research, so I would want to engage in it if I could be reasonably sure that it would actually help with my current research. However, if I forswear a summer internship to focus on my current research, then I have to really make sure that I fully investigate my options following graduation; for example, I have a few ideas on research topics to pursue following graduation, but I have no idea how feasible they are because they're in an adjacent field with which I have essentially no experience, so I need to get to know people in that field and make those connections to facilitate my next move. I'm going to the 2018 APS March Meeting next week, so with the uncertainty about my research projects & directions in the short- & long-terms along with the need to more seriously network with researchers in the field, this upcoming conference does feel like it has higher stakes for me than the one I went to last year, when I wasn't as worried about such things.

Such seems to be the course of research in a PhD. I'm glad that I've been able to take up these responsibilities and become a more well-rounded researcher & educator, and the uncertainty of research is gratifying to the extent that I get to investigate different ideas with the chance to fail and improve further in the hopes that I will ultimately hit upon something successful. However, the flip side of that uncertainty is stress when I realize that I have to deliver in some way, whether that means making a good impression & networking effectively at a conference or seriously considering upcoming career moves (where I again would have to make a good impression upon whoever may be evaluating me for a job). Ultimately, my hope is that I can continue to work hard & stay focused on what I need to do without letting that stress and uncertainty cloud my decision-making in the hope that my hard work will pay off, in the same way that in my second year, when I was stressed about my slow research progress relative to some of my peers, I simply pressed on and was eventually rewarded (through the fruit of my labor) with a publication at the beginning of my third year; even if that payoff doesn't come in the way that I expect, my hope is also that by that point, I will have cast a wide enough net that other options will be available to me too.

2017-10-09

On the Nobel Prize for Gravitational Waves

This is a short post about the news from last week, that the Nobel Prize in Physics went to 3 of the founders of the LIGO project that first observed gravitational waves. I was quite happy to see the news, for several reasons. One of the PIs, Rainer Weiss, is an emeritus professor from MIT, so there was the alma mater pride factor there; plus, that professor, along with the two other co-laureates, are all quite old, and it would have been a real shame if they hadn't survived to be recognized by the Nobel Prize committee for this incredible work, so it really was time for them to be recognized as such. From an applied science perspective, the amount of high-precision science and engineering they had to do, building laser systems, mirrors, and large-scale interferometers to measure atomic-scale and smaller displacements where quantum effects are important, has been amazing and will undoubtedly influence future technological development in those areas, even as gravitational waves themselves are at energy scales that are far too small to be useful in the near future (though people used to say that about quantum mechanics, and then transistors came about, so it's always better to be open to the possibility, while being mindful that this particular possibility is more remote).

Mostly, though, I'm thrilled to see this discovery being recognized from the perspective of fundamental science. My research is in fluctuational electrodynamics, which means that I deal with the propagation and scattering of electromagnetic fields at small length scales as they originate from quantum or thermal fluctuating atomic or electronic sources. Thus, all I think about on a daily basis is really electromagnetic interactions (and occasionally quantum exchange effects). But then, most physicists, with the exception of high-energy physicists (who study very short-ranged weak & strong interactions anyway), tend to make use of electromagnetism almost exclusively in their research, especially on the experimental side, as any spectroscopy, interferometry, and so on, would necessarily involve the propagation and scattering of light. In fact, if I think about how humans sense the world around them, vision is of course electromagnetic in nature, but so are hearing (detection of pressure waves caused by scattering of atoms and molecules in the air via short-range electromagnetic repulsion from atoms and molecules in the ear) and touch (short-range electromagnetic forces between atoms and molecules on the skin and a given surface), while electrical signals travel through neurons in the body by virtue of electromagnetic forces. Thus, in the context of sensing and understanding the world around us through truly long-range interactions, gravitational waves are fundamentally different, and it's weird to think that the interaction that keeps us on this planet can also be used in such a different way (i.e. propagating waves) to get information about faraway astronomical objects that wouldn't be available through purely electromagnetic means.

2017-07-03

Second Paper: "Unifying Microscopic and Continuum Treatments of van der Waals and Casimir Interactions"

My second paper has been published! It is in volume 118, issue 26 of Physical Review Letters, and an older preprint of it is available too for those who don't have access to academic journals (it has all of the same figures and ideas, though it is missing a few sentences of further explanation as well as a couple of new citations that were inserted for the final publication). As with my first paper, in the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next.

2017-04-03

My Time at the 2017 APS March Meeting

This is just a quick update from my graduate studies. In the middle of March, I was able to attend the 2017 APS March Meeting in New Orleans, Louisiana; this is the first conference that I have attended in any capacity. I had a ton of fun being able to travel there and meet with old friends, collaborators whom I had not yet met in person, and other people that I didn't know but who have been working on similar things to me; it was great being able to discuss interesting potential project ideas with them. Going to many talks was also cool, giving me a good sense of the state of my field and the sort of work that other people are doing, though in many respects, I honestly feel like I learned more just from talking with people at length in more informal settings. Finally, the highlight for me was getting to present my own work and seeing the interest that many people took in it: I was presenting a semiclassical electromagnetics approach to van der Waals interactions between molecules and larger bodies in a session dominated by density functional and atomistic long-range many-body approaches to van der Waals interactions solely in [large] molecular systems, so I was truly gratified to see that members of the audience saw value and significance in what I've been doing, especially given how different my talk was from those that came before and after it in that session. Overall, I had an amazing time, and I hope to be able to attend other conferences, both similar to this as well as more specific to my research, during my remaining time in graduate school.

2016-10-03

First Paper: "Nonadditivity of van der Waals forces on liquid surfaces"

My first paper has been published! It is in volume 94, issue 3 of Physical Review E, and an older preprint of it is available too for those who don't have access to academic journals (it has all of the same figures and ideas, though it is missing a few sentences of further explanation as well as a couple of new citations that were inserted for the final publication). In the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer and the Wiktionary list of the 1000 most used words. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next.

2016-07-18

Classical Damping of Gases and Oscillators

I was on vacation last week, and during some quiet time, I randomly happened to be thinking about explanations for damping in physical systems. I remember learning in ELE 456 — Quantum Optics, from last spring, that the phenomenological linear damping of a classical oscillator could be derived by coupling a quantum oscillator to a thermal bath of quantum oscillators; each linear oscillator is microscopically undamped, but by treating the bath through statistical thermodynamics, the coupling of the oscillator in question to a bath essentially produces a linear damping coefficient dependent on the spectrum of the bath (and the coupling too). Microscopically, the quantization of energy levels in a linear oscillator makes it easy to interpret how discrete excitations can move from one oscillator to another coupled oscillator, but I was wondering if quantum mechanics is really necessary to explain damping. Follow the jump to see an extremely rough sketch of ideas that may (or may not) justify the use of classical mechanics by itself. (Added after finishing: this turns out to be a rambling and possibly ultimately pointless post with a much clearer and more self-consistent explanation linked at the end, so for the time being, humor me.)