Showing posts with label paper. Show all posts
Showing posts with label paper. Show all posts

2021-07-01

Twelfth Paper: "Near-field radiative heat transfer in many-body systems"

My twelfth paper has been published! It is in volume 93, issue 2 of Reviews of Modern Physics, and an older preprint of it is available too for those who don't have access to academic journals (it is identical in content and only differs in formatting). Unlike my previous blog posts about published papers that I have written, this one will not strictly use the thousand most common words in English. This is because unlike my previous papers, which put forth novel ideas advancing the field of nanophotonics, this is a review paper that gives a broad historical scientific overview of the subject, namely, the flow of heat through light (i.e. electromagnetic (EM) fields) between objects that are typically separated by less than 1 micron (approximately 1% of the width of a typical human hair). It goes over work that other scientists have done theoretically and experimentally in this subject, and this paper in particular is divided into two main sections.

The first section, to which my PhD advisor & I made most of our contributions, is about the flow of heat via EM fields between just 2 objects. Relevant issues include choices of materials (mainly metals/conductors versus insulators), choices of shapes for objects, advances in experimental measurement techniques, advances in computational simulation techniques, and derivations of upper limits to the flow of heat via EM fields between 2 objects (mostly referring to my previous 2 papers that were the subject of the following linked blog post).

The second section, which constitutes the bulk of the paper, is about the flow of heat via EM fields among more than 2 objects. Relevant issues include changes in temperature over time in objects that are very small compared to their separations, the fact that the heat flow among more than 2 objects involves very complicated interactions among them, the fact that material properties could depend on temperature so there could be many possible sets of object temperatures where heat flows but temperatures don't change, heat flow via EM fields over distances longer than 1 micron, applications of heat flow via EM fields to microscopy techniques, heat flow via EM fields in materials that can be attracted to permanent magnets, and applications of heat flow via EM fields to engineer new devices.

2020-08-10

Eighth, Ninth, Tenth, and Eleventh Papers

My eighth, ninth, tenth, and eleventh papers have been published! These require subscriptions to read, so here are alternate links to older preprints for the eighth, ninth, tenth, and eleventh papers, respectively (which have most of the same content, with some minor changes to explanations, citations, and figures relative to the published versions). As with my previous papers, in the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next. While these papers aren't as closely related to each other as the previous three, there are enough relations that I'm putting them together in a single post. These papers need a lot more math (note: "math" isn't one of the ten hundred words) than the papers before, and because they need a lot of thinking to get, I actually won't say as much about them.

On another note, this is a milestone for me because these are the last papers from my PhD in which I was a leading author. I still have one more review paper left to be published, but as that has been submitted to the journal and as I'm not the leading author, I don't really need to worry about that at this point. (Of course, once that is published, I will write a blog post summarizing it, though as it is a review paper, that summary will probably be quite short.) Thus, I am truly done with the work from my PhD, and can fully shift my mindset away from physics toward thinking about problems in transportation policy, as I will do in my postdoctoral research at UC Davis.

2020-01-13

Fifth, Sixth, and Seventh Papers

My fifth, sixth, and seventh papers have been published! These require subscriptions to read, so here are alternate links to older preprints for the fifth, sixth, and seventh papers, respectively (which have most of the same content, with some minor changes to explanations, citations, and figures relative to the published versions). As with my previous papers, in the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next. I'm putting these three papers together in a single post because they form a trilogy of sorts, all having to do with finding the biggest number for how much heat, through light, can go from one body to another when they are really close together, or can go from one body into outer space. These papers need a lot more math (note: "math" isn't one of the ten hundred words) than the papers before, and because they need a lot of thinking to get, I actually won't say as much about them.

The fifth paper is called "T Operator Bounds on Angle-Integrated Absorption and Thermal Radiation for Arbitrary Objects", and is in volume 123, issue 5 of Physical Review Letters. This is the one that has to do with how much heat, through light, can go from one body to outer space. People knew before that the number for how much heat really big bodies can put through light into outer space grows like the surface area of the body, but for really small bodies it grows like the space of the whole body (volume), and they were not sure how these two things join in between. This paper lets people figure out what the most heat is that can go from a body through light into outer space no matter what the largest shape the body can sit in, and shows how to join the things that people knew before for middle-size bodies of different shapes. (Another press release from my department can be found here.)

The sixth paper is called "Fundamental limits to radiative heat transfer: Theory", and is in volume 101, issue 3 of Physical Review B, while the seventh paper is called "Fundamental Limits to Radiative Heat Transfer: The Limited Role of Nanostructuring in the Near-Field", and is in volume 124, issue 1 of Physical Review Letters. Those two papers go together, so I'll write about them together. The sixth paper is about the math behind figuring out the biggest number for heat, through light, to go between two bodies. The seventh paper shows that heat, through light, going between two big flat bodies that are close together can be pretty close to the biggest number possible, so making the shapes of the bodies less simple than just flat surfaces is of no use.

2019-11-05

Fourth Paper: "Impact of nuclear vibrations on van der Waals and Casimir interactions at zero and finite temperature"

My fourth paper has been published! It is in volume 5, issue 11 of Science Advances, which is an open-access journal, so anyone can read it. As with my previous papers, in the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next.

In papers that came before this one, I looked at how to do a better job of figuring out the van der Waals (vdW) forces, which are the forces that let geckos (small animals with hard skin over which your finger can slip easily) stick to anything no matter what it is made of, between molecules, which are the little things that make up most of the stuff we see and are in turn made of smaller things called atoms; I also looked at how to do a better job of figuring out how heat (through light) goes between different molecules, especially when they are near larger bodies, and that needed me to do a better job of considering how molecules can make changes on each other through light, and that means that I need to better consider how the full atoms within molecules move toward and away from each other in a way that repeats itself. In this paper, I used the new way from the paper that came before of considering how molecules can make changes on each other through light to show what happens with vdW forces between molecules and larger bodies, especially when they aren't as cold as possible but are as hot as a room you might go into each day. It turns out that for small or long thin molecules made of carbon atoms, our work can do a pretty good job of showing how being as hot as a room can make vdW forces look very different. For some kinds of large thin sheets of atoms, like boron nitride in which every other atom is boron or nitrogen, our work still does a pretty good job because the electrons, which are the parts of the atoms that are the smallest, lightest, and move around the most, are still pretty close to the centers of the atoms. On the other hand, for other kinds of large thin sheets of atoms, like graphene in which every atom is carbon, our work has some more problems, because electrons in graphene can move around a lot more than our work might make you think, and the ways in which those electrons change how the rest of the atoms move around when they are as hot as a room (instead of as cold as possible) makes vdW forces harder to figure out than our work can say. This means we still need to do more work to better figure out how vdW forces look for those kinds of sheets.

2018-08-01

Third Paper: "Phonon-Polariton Mediated Thermal Radiation and Heat Transfer among Molecules and Macroscopic Bodies: Nonlocal Electromagnetic Response at Mesoscopic Scales"

My third paper has been published! It is in volume 121, issue 4 of Physical Review Letters, and an older preprint of it is available too for those who don't have access to academic journals (it has all of the same figures and ideas, though it is missing a few sentences of further explanation as well as a couple of new citations that were inserted for the final publication). As with my previous papers, in the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next.

In the paper that came before this one, I looked at how to do a better job of figuring out the van der Waals (vdW) forces, which are the forces that let geckos (small animals with hard skin over which your finger can slip easily) stick to anything no matter what it is made of, between molecules, which are the little things that make up most of the stuff we see and are in turn made of smaller things called atoms. I tried to figure out how these forces look at distances where the fact that molecules are made of atoms is important, but if those molecules are near much larger bodies, the fact that the larger bodies are made of atoms and molecules should be less important; it turns out that at those distances, how fast light goes matters a lot, and using ways to figure out these forces exactly instead of using easier ways to figure out those forces makes a big change in what those forces are. That paper was able to show how to bring together all of these different ideas from considering large and small bodies in a single way where none of those ideas can be ignored. That would be important when considering new kinds of molecules like graphene, which is made of a lot of carbon atoms in a thin sheet, or really long molecules like DNA or those found in foods, when those molecules are near larger bodies that we make.

This paper looks at the same sorts of molecules, but not at vdW forces anymore. Instead, in this paper, I look at how heat (through light) goes between different molecules, especially when they are near larger bodies. For that, I need to do a better job of considering how molecules can make changes on each other through light, and that means that I need to better consider how the full atoms within molecules move toward and away from each other in a way that repeats itself. By doing that, I can now show how heat through light goes between different molecules, whether they are close together or far away from each other. When people considered heat going through light between larger bodies, they found that the heat would keep growing as the bodies came closer together, and that growing wouldn't stop; from knowing how things work every day, we know that once bodies come close enough, they touch each other, and the growing stops at some point. In this paper, I've shown that when molecules come close together, the heat grows for a while, but if they come close enough, that growing does stop, so I've been able to show what distance we can say two molecules touch each other, so that heat going between molecules happens through them touching instead of through light. This is really important for things like graphene, which are used as part of things used for making power from the sun by getting its light and heat, and also for making new things that can become part of computers made of really small things like molecules that work because of heat going between different parts.

2017-07-03

Second Paper: "Unifying Microscopic and Continuum Treatments of van der Waals and Casimir Interactions"

My second paper has been published! It is in volume 118, issue 26 of Physical Review Letters, and an older preprint of it is available too for those who don't have access to academic journals (it has all of the same figures and ideas, though it is missing a few sentences of further explanation as well as a couple of new citations that were inserted for the final publication). As with my first paper, in the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next.

2016-10-03

First Paper: "Nonadditivity of van der Waals forces on liquid surfaces"

My first paper has been published! It is in volume 94, issue 3 of Physical Review E, and an older preprint of it is available too for those who don't have access to academic journals (it has all of the same figures and ideas, though it is missing a few sentences of further explanation as well as a couple of new citations that were inserted for the final publication). In the interest of explaining these ideas in a way that is easy to understand, I am using the ten hundred most used words in English (except for the two lines that came before this one), as put together from the XKCD Simple Writer and the Wiktionary list of the 1000 most used words. I will use numbers sometimes without completely writing them out, use words for certain names of things without explaining further, and explain less used words when they come up. Keep reading to see what comes next.