My previous laptop was an ASUS UX331UN, and I wrote a post when I got it 6 years ago reviewing it [LINK]. It served me well, so I figured for a while that when it came time to replace it, I would most likely get another ASUS laptop. Over most of this year, I noticed progressively more often when using that laptop that it would make an odd whirring sound, and that would be especially noticeable when it would be shutting down. This motivated me to start considering to get a new laptop. More recently, the recent US presidential election result forced the issue for me, as I was concerned that the president-elect, once inaugurated, would impose heavy tariffs on many different countries that would significantly impede global supply chains that are essential for the manufacturing of electronic goods, including laptops. Thus, I thought carefully about and made the decision to buy a new laptop. Follow the jump to see more.
2024-12-04
2020-09-30
Ongoing problems connecting a Canon CanoScan 4400F scanner to Linux Mint
This post is about the experiences I've had connecting a Canon CanoScan 4400F scanner to various computers, primarily focusing on my current laptop which, as of the time of first writing this post, ran Linux Mint 19 "Tara" MATE along with Microsoft Windows 10. For context, I am hoping to scan some of my personal & work notebooks for personal archival. I figured that this scanner, which I've had for a long time, does a good job at rendering images, even though it is quite old & slow, so I should continue using it for as long as it continues to work.
I used to use this scanner regularly with my previous laptop, which is an ASUS U30Jc and, when I last ran it regularly, ran Linux Mint 18.3 "Sylvia" along with Microsoft Windows 7; initially when I connected the scanner to the old laptop (a few years ago), it didn't work with Linux Mint out-of-the-box, so I decided to do all scans in Microsoft Windows and then transfer files between partitions later. I stopped using that laptop approximately 2 years ago, and since then until the beginning of this month, it just sat in a box gathering dust. At the beginning of this month, desirous of using this scanner again for the aforementioned purposes, I brought out the old laptop & scanner, but found out that in the intervening 2 years, the damage to the laptop's screen & hinge had worsened, the battery had completely died due to no charging in that time, and the laptop (on either OS) would randomly overheat & shut off. At this point, I now believe that old laptop should be junked.
My current laptop is an ASUS ZenBook UX331UN. I didn't think the scanner would work with it, because it uses USB 1.1, and I remember having trouble getting this laptop to read an older USB device. Just for the heck of it, I decided to connect the scanner to see what happens. Just as with my old laptop, in Linux Mint, the Simple Scan application didn't find any connected scanners. However, I had the idea to run the command "sudo simple-scan" from the terminal. That showed that the scanner was in fact being recognized, so this was probably a permission problem; I also realized that the earlier problem with another old USB device was specific to that device and not a general issue with this laptop reading any older USB device. That said, when I tried to scan a document, I got a window showing the error "Failed to scan: Unable to connect to scanner". Follow the jump to see more.
2018-12-03
Second Laptop: ASUS ZenBook UX331UN
A few months ago, I noticed that part of the plastic frame around the screen of my old laptop, along with the hinge below it, had partially detached. A little over a month ago, that detachment had become much more noticeable, to the point of becoming a liability for me: the laptop would no longer close properly (without me risking breaking it altogether), so I would not be able to take it anywhere outside. Up until that point, I had experienced no major hardware issues with that laptop, and only minor issues such as the optical drive occasionally being unresponsive; I could tell that it was struggling a little more with newer software, but on the whole, it was performing quite well, so while I had from time to time over the last couple of years been looking casually into replacing it, this sudden development forced the issue. Given my disability, I wanted something a bit more lightweight, because my old laptop was 4.5 pounds, which was a bit heavy for me; that said, I still wanted something that would offer a reasonable amount of computational power, and while I didn't anticipate requiring a high-performance graphics card for gaming as I am not a serious gamer, I figured there may be some casual games as well as the possibility of getting into GPU programming for my work for which I may want a reasonable dedicated graphics card. Luckily, I found the ASUS ZenBook UX331UN, which seemed on paper to fit the bill on all counts, and I found only a few left in stock online for a reasonable price (just over $1000), so I went ahead and bought one. Follow the jump to read more.
2011-06-20
2011 June 20: Linux and My Computers' Hardware
First Computer (Past)
Sony VAIO desktop with Intel Pentium 4/HT processor at 2.8 GHz, 1 GB RAM, 160 GB hard drive, integrated ATI Radeon 9200 graphics card with available 1920 by 1200 resolution (used 1280 by 1024), integrated sound card, used in conjunction with a 21 inch Nokia CRT 4:3 monitor, Sony speakers, keyboard, and mouse, and Logitech QuickCam Communicate STX webcamSecond Computer (Current)
ASUS U30Jc laptop with Intel Core i3-370M processor at 2.4 GHz, 4 GB RAM, 320 GB hard drive, integrated Intel GMA 4500HD graphics card with available discrete NVidia GeFore 310M (512 MB graphics memory) graphics card with 1366 by 768 resolution, integrated sound card and speakers, integrated keyboard, integrated webcam and mic, used in conjunction with Microsoft USB mouseFollow the jump to see the rest.
2010-11-21
Apologies about VirtualBox Testing
Well, I'm happy to report that I can in fact boot from USB on my laptop (and in fact, I'm writing this from a Linux Mint "Debian" 201009 GNOME live USB), and for this I need to apologize to those commenters who sincerely asked why I wasn't more sincere in my own distribution testing. I'm truly sorry that my laziness (in terms of actually taking time to look for an answer) mislead all of us. That said, testing with VirtualBox has been fun in its own way (and I may still do that with "light" distributions to see things like how little RAM they really need), but now that I know I can use live USBs in my laptop, I'll certainly be doing that, as I can now test things like USB support, 3D compositing support, and webcam support that I couldn't before.
Oh, and for the record, the issue was that I was manipulating the wrong BIOS submenu to give the USB device boot priority over the hard drive. Now I know...
2010-10-28
Microsoft's Latest Scare Tactics as of 2010 October 28
It seems like now, as this article (Adam Hwang, Digitimes) points out, Microsoft could possibly make good on this, although it seems like it's just bullying companies into paying royalty fees as opposed to outright suing. It's charging AsusTEK and Acer royalty fees for the very vague "email, multimedia, and other" functions just to make sure they don't sell netbooks or tablets with Android or Chrome OS on them. It would be a shame if these companies submitted to Microsoft's demand, but it'll probably happen considering that the same thing happened to Novell and HTC; then again, consumers are now more aware than ever of alternatives to Microsoft Windows, so I think they may actually seek out and demand Android and Chrome OS devices anyway. Let's see how this turns out.
2010-08-18
New Laptop!
Also, you may see a new post (which I've spent a few days on) coming soon; that post was done with regard to this new laptop.